Roller Conveyors
– With V-belt drive

For transport with high speed, low noise og high precision

Roller conveyors with V-belt drive are often used for transport of building materials.

The conveyor design is standardized and modelized to meet the maximum and minimum product(pallet) size and weight.

The roller diameter and pitch is selected from our standard product range together with the robust steel frame, supports and motor-frame.

The rollers are equipped with double bushings in one end and are driven by V-belts from roller to roller.

The drive system is covered by a closed steel guard protecting it from dust and particles. V-drive enable angling of rollers for product alignment and separation.

The complete steel frame is designed for heavy duty application, long lifetime and minimum maintenance.

Knowledge and service

Our experienced design team analyses your application, existing and new conditions through site visits, product mix analysis, de-bottlenecking, and tailer-make a solution well suited for your new or existing production line.

Whether a higher capacity, a different product mix or a leaner production flow is required, we develop the solution(s) in 3D layout for easy review of all details, interfaces, check of footprint and scope of supply.

The layout can easily be shared with end-users, operators and specialists for exchange of experience, developing the optimum long-lasting solution.

Most projects have several possible solutions and we align the project to meet the financial budget, designing the most cost-effective solution.

When creating projects in several steps, we always keep the end configuration in mind, and ensure major equipment is placed correct the first time, ensuring good accessibility at the end stage.

Meeting client’s specification and requirement is our main objective – capacity, startup on time and meeting the budget are the key factors.

The capacity of a new or upgraded automatic system shall be met, and critical parts of the layout is simulated, using Visual Components software together with the CH designed conveyors/machines/gantry robots or Kuka industrial robots & AGV’s.

Product traceability is secured using the latest technology including 2.D barcodes, RFID tags, etc. Using Industrie 4.0 technologies, we strive to build/design the most intelligent production line for your future factory.

Technical information

Specifications

The below values apply to our standard conveyors. Variations and special designs are possible

Length	Up to 6.000 mm
Width	Up to 4.500 mm
Height (motor installed below)	From 400 mm
Height (motor installed on side)	From 120 mm
Conveying speed (depending on product)	Up to 45 m/min. Optional with variable with frequency inverter
Roller diameter	76, 89 mm
Roller pitch in mm	Fully variable
Roller angle	90 to 50 degree
Temperature	+5 /+50 °C
Adjustable height in mm	± 50
Motor (IE3/4)	SEW EuroDrive or Siemens

Details

Possible to transfer product across rollers without requiring lift even in drive-side of roller.
Each roller has 20 mm diameter ball bearing that is lifetime greased.
Steel structure is powder coated to the client color requirement
Energy-efficient gearmotors from SEW or Siemens depending upon client’s requirements
Any type of sensor or photocell can be mounted for start/stop.
Ready for integration with CH standard angular transfers
Any type of communication with frequency inverter
Each conveyor will have a Declaration of Incorporation of partly completed machinery.
The conveyor is inherently safe can be installed without any fencing.

Optional

Food safety version with lifetime greased bearing and smooth surface easy to clean.
Stainless steel rollers for direct contact with food products.
Variable speed with frequency converter from MoviMot or Siemens.

Special features

Coating of the rollers, stop plates, alignment unit, side guides, vertical side belts, angular transfer, build-in turning cross, cut-out in conveyor frame for robot gripper even in drive-side, plastic cover for easy inspection of drive chain.